Sensor selection based on principal component analysis for fault detection in wind turbines

Growing interest for improving the reliability of safety-critical structures, such as wind turbines, has led to the advancement of structural health monitoring (SHM). Existing techniques for fault detection can be broadly classified into two major categories: model-based methods and signal processing-based methods. This work focuses in the signal-processing-based fault detection by using principal component analysis (PCA) as a way to condense and extract information from the collected signals. In particular, the goal of this work is to select a reduced number of sensors to be used. From a practical point of view, a reduced number of sensors installed in the structure leads to a reduced cost of installation and maintenance. Besides, from a computational point of view, less sensors implies lower computing time, thus the detection time is shortened. The overall strategy is to firstly create a PCA model measuring a healthy wind turbine. Secondly, with the model, and for each fault scenario and each possible subset of sensors, it measures the Euclidean distance between the arithmetic mean of the projections into the PCA model that come from the healthy wind turbine and the mean of the projections that come from the faulty one. Finally, it finds the subset of sensors that separate the most the data coming from the healthy wind turbine and the data coming from the faulty one. Numerical simulations using a sophisticated wind turbine model (a modern 5MW turbine implemented in the FAST software) show the performance of the proposed method under actuators (pitch and torque) and sensors (pitch angle measurement) faults of different type: fixed value, gain factor, offset and changed dynamics.Postprint (published version

Wind turbine condition monitoring strategy through multiway PCA and multivariate inference

This article states a condition monitoring strategy for wind turbines using a statistical data-driven modeling approach by means of supervisory control and data acquisition (SCADA) data. Initially, a baseline data-based model is obtained from the healthy wind turbine by means of multiway principal component analysis (MPCA). Then, when the wind turbine is monitorized, new data is acquired and projected into the baseline MPCA model space. The acquired SCADA data are treated as a random process given the random nature of the turbulent wind. The objective is to decide if the multivariate distribution that is obtained from the wind turbine to be analyzed (healthy or not) is related to the baseline one. To achieve this goal, a test for the equality of population means is performed. Finally, the results of the test can determine that the hypothesis is rejected (and the wind turbine is faulty) or that there is no evidence to suggest that the two means are different, so the wind turbine can be considered as healthy. The methodology is evaluated on a wind turbine fault detection benchmark that uses a 5 MW high-fidelity wind turbine model and a set of eight realistic fault scenarios. It is noteworthy that the results, for the presented methodology, show that for a wide range of significance, a in [1%, 13%], the percentage of correct decisions is kept at 100%; thus it is a promising tool for real-time wind turbine condition monitoring.Peer ReviewedPostprint (published version

Sistemas de autoaprendizaje y autoevaluación dentro de la plataforma Atenea

Peer Reviewe

Damage diagnosis for offshore fixed wind turbines

This paper proposes a damage diagnosis strategy to detect and classify different type of damages in a laboratory offshore-fixed wind turbine model. The proposed method combines an accelerometer sensor network attached to the structure with a conceived algorithm based on principal component analysis (PCA) with quadratic discriminant analysis (QDA). The paradigm of structural health monitoring can be undertaken as a pattern recognition problem (comparison between the data collected from the healthy structure and the current structure to diagnose given a known excitation). However, in this work, as the strategy is designed for wind turbines, only the output data from the sensors is used but the excitation is assumed unknown (as in reality is provided by the wind). The proposed methodology is tested in an experimental laboratory tower modeling an offshore-fixed jacked-type wind turbine. The obtained results show the reliability of the proposed approach.Peer ReviewedPostprint (published version

Condition Monitoring of Wind Turbine Structures through Univariate and Multivariate Hypothesis Testing

This chapter presents a fault detection method through uni- and multivariate hypothesis testing for wind turbine (WT) faults. A data-driven approach is used based on supervisory control and data acquisition (SCADA) data. First, using a healthy WT data set, a model is constructed through multiway principal component analysis (MPCA). Afterward, given a WT to be diagnosed, its data are projected into the MPCA model space. Since the turbulent wind is a random process, the dynamic response of the WT can be considered as a stochastic process, and thus, the acquired SCADA measurements are treated as a random process. The objective is to determine whether the distribution of the multivariate random samples that are obtained from the WT to be diagnosed (healthy or not) is related to the distribution of the baseline. To this end, a test for the equality of population means is performed in both the univariate and the multivariate cases. Ultimately, the test results establish whether the WT is healthy or faulty. The performance of the proposed method is validated using an advanced benchmark that comprehends a 5-MW WT subject to various actuators and sensor faults of different types

Goal oriented error estimation for the element free Galerkin method

A novel approach for implicit residual-type error estimation in meshfree methods is presented. This allows to compute upper and lower bounds of the error in energy norm with the ultimate goal of obtaining bounds for outputs of interest. The proposed approach precludes the main drawbacks of standard residual type estimators circumventing the need of flux-equilibration and resulting in a simple implementation that avoids integrals on edges/sides of a domain decomposition (mesh). This is especially interesting for mesh-free methods

Hysteresis-based design of dynamic reference trajectories to avoid saturation in controlled wind turbines

The main objective of this paper is to design a dynamic reference trajectory based on hysteresis to avoid saturation in controlled wind turbines. Basically, the torque controller and pitch controller set-points are hysteretically manipulated to avoid saturation and drive the system with smooth dynamic changes. Simulation results obtained from a 5MW wind turbine benchmark model show that our proposed strategy has a clear added value with respect to the baseline controller (a well-known and accepted industrial wind turbine controller). Moreover, the proposed strategy has been tested in healthy conditions but also in the presence of a realistic fault where the baseline controller caused saturation to nally conduct to instability.Peer ReviewedPostprint (author's final draft

Una aproximacion al panorama de las publicaciones periódicas literarias mexIcanas (1950-1995)

Sin resume

Fault tolerant control design of floating offshore wind turbines

This work is concerned with active vibration mitigation in wind turbines (WT) but not through the use of specifically tailored devices. Instead, a general control scheme is designed for torque and pitch controllers based on a super-twisting algorithm, which uses additional feedback of the fore-aft and side-to-side acceleration signals at the top of the WT tower to mitigate the vibrational behavior. In general, proposed methods to improve damping through pitch and torque control suffer from increased blade pitch actuator usage. However, in this work the blade pitch angle is smoothed leading to a decrease of the pitch actuator effort, among other benefits evidenced through numerical experiments. The most frequent faults induce vibrations in the corresponding WT subsystems. In fact, vibration monitoring has been recently used for fault diagnosis Thus, by means of vibration mitigation, different faulty conditions can be alleviated leading to a passive fault tolerant control. In this work, coupled non-linear aero-hydro- servo-elastic simulations of a floating offshore wind turbine are carried out for one of the most common pitch actuator faults.Postprint (published version

Wind turbines controllers design based on the super-twisting algorithm

The continuous increase in the size of wind turbines (WTs) has led to new challenges in the design of novel torque and pitch controllers. Today’s WT control design must fulfill numerous specifications to assure effective electrical energy production and to hold the tower vibrations inside acceptable levels of operation. Hence, this paper presents modern torque and pitch control developments based on the super-twisting algorithm (STA) by using feedback of the fore- aft and side-to-side acceleration signals of the WT tower. According to numerical experiments realized using FAST, these controllers mitigate vibrations in the tower without affecting the quality of electrical power production. Moreover, the proposed controllers’ performance is better than the baseline controllers used for comparison.Postprint (author's final draft